Scottie Dog Set Patterns

There are slight variations to materials and instructions between these two versions of the same pattern in different publications. Two versions are below.

Thread Mills #9305, Quick Crochet with Enterprise Yarn

Soft, Cuddly "Sleepy Time" Toys will replace factory mades that are hard to get. To be crocheted of washable Enterprise Cotton Yarn and stuffed with cotton or other soft materials • just the thing for a sleepy child to take to bed • so soft they can be rolled upon and do no harm.

Complete row by row instructions as far as needed are given— then follow the chart.

Crocheted in Puff Stitch, these toys are firm—durable and, if tightly crocheted, will not stretch.

TO FOLLOW CHARTS IN PUFF STITCH

The charts show layout of puffs to be followed to make all of these toys. Puff Stitch is simple to do—read the first 3 rows of Humpty Dumpty Doll instructions. Following any of the charts, row after row are crocheted in the same manner. Each square on the chart is a puff stitch.

Diagonal lines that form curved edges indicate increases (as in Row 10 of Humpty Dumpty Doll instructions) or decreases. To decrease at beginning of rows, sk last sc, dc in next sc,—hold final loop of it on hook, draw up loop in next st, thread over and thru all 3 loops on hook at once.

To find number of ch sts to start—count 2 chs for each puff, plus 2 and add an extra ch for each increase on starting edge; i. e. chart for starting edge at top of Jumbo Elephant Toy shows 7 puffs and 2 increases—7 x 2 + 2 = 16 and add 1 ch for each increase = 18 ch on starting chain.

Make two side pieces for each toy so that wrong sides may be placed together in same positions.

You can lay out your own ideas on cross section paper to be crocheted in the same manner for other toys.

SCOTTIE DOG TOY

MATERIALS: 2 balls for body—just a few yards of color for collar and eye.

Start at foot with ch 8, 7 sc on ch. 3 puffs in next 2 puff rows. In third puff row make an inc (as in Row 10 of Humpty Dumpty Doll) and 3 puffs. Last puff row (No. 4) has 4 puffs. Make two feet,—after last sc in last puff row of second leg, ch 7, sl st to first sc in puff row 4 of first foot, then work 25 sc across legs and ch 7 to start body. Head is made separately and sewn to body. Inset piece is 3 puffs wide, start same as for feet. For collar ch 40 in color, 39 sc on ch. Fasten around neck.

The two sides of this Scottie will make an excellent Hot Pot Holder—pad each side and line with muslin—place padded sides together and stitch from base of neck, around nose and across top to base of tail.

Thread Mills #9307, 40 Hot Pot Holders and Other Gadgets

HOT POT HOLDER

One of the most novel pot holders to be crocheted that we have ever seen! Firm and heavy for use with hottest pots and pans, — a dressy, ornamental holder to hang beside the stove. It's double — to slip over the handle!

MATERIALS: 100 yds. White Enterprise Yarn and just a few yards of color (for eye and collar) will be needed for the holders. The Sleepy Time Scottie will need 60 to 75 yards more, of White, for the inset piece.
Steel Crochet Hook No. 1.

NOTE: Puff Stitch is a new stitch—there are new abbreviations not commonly used in crocheting, in these instructions:— for increases (inc.) make 1 sc, 1 dc in first st, to start puff row; 1 dc, 1 sc, in last st to end a puff row. Also PUFF STITCH OR PUFFS are indicated as PS.

Two sides will be needed for either the holders or the toy.

Starting at feet, with White ch 8, 7 sc on chain.
ROW 2: Ch 1, turn, sc in last sc, * 2 dc in next sc, holding final loop of each dc on hook, thread over and pull through all three loops at once. (1 puff st (PS) made), sc in next sc, (pull it down tight, to let the ps puff out on back of work) which will be the right side. Repeat from * across (3 Ps).
ROW 3: Ch 1, turn, sc in first sc, (sc in ps, sc in next sc), repeat across (7 sc). Repeat Row 2.
ROW 5: Ch 1, turn, sc in first 6 sts, 2 sc in end sc.
ROW 6: Ch 1, turn, sc, dc, (an inc.), in first sc, sc in next sc, ps in next, repeat to end (3 ps and 1 inc.).
ROW 7: Ch 1, turn, sc in each st (9 sc). Repeat Row 2, (4 ps).
Break thread and make second piece to correspond, working inc. at beginning of sc rows with ch 2, turn, sc in second st from hook, sc in each st across. Then work puff row to within 1 st of end, inc. in end st. Repeat last 2 rows of first foot (making inc. as before at opposite ends of row) then ch 7, sl st to first sc in puff Row 8 of first foot. Cut thread 2" from work.

BODY: With right side up, attach thread to first sc of first foot, ch 1, sc in each st across, working over ends, covering them up (25 sc in row).
ROW 2: Ch 1, turn, ps across (12 ps). Repeat Rows 1 and 2 twice.
ROW 7: Ch 1, turn, sc in first 23 sts.
ROW 8: Ch 1, turn, work 11 ps in row. Repeat Row 7 (21 sc), then Row 8 (10 ps).
ROW 11: Ch 2, turn, sk 1 st of 2-ch, sc in next 22 sts across.
ROW 12: Ch 1, turn, 10 ps across, inc. in end sc.

TAIL: Ch 1, turn, sc in first 9 sts, ch 1, turn, 4 ps in row. Ch 2, sk 1 st of 2-ch, sc in next 8 sts. Ch 1, turn, 3 ps to end, inc. in end st. Ch 1, turn, sc in first 7 sts. Ch 1, turn, sk 2 sc (sc in next, ps in next) repeat once, sc in end st. Ch 1, turn, sc in first 5 sts. Fasten off.

HEAD: Ch 12, 11 sc on ch. Ch 1, turn, 5 ps across. Ch 1, turn, sc in each 11 sts across. Ch 1, turn, 5 ps in row. Ch 1, turn, sc in each 11 sts. Ch 1, turn, 5 ps in row. Ch 1, turn, sc in each st to end. 2 sc in end st (12 sc). Ch 1, turn, inc. in first sc, (sc in next, ps in next) repeat across (5 ps and 1 inc.). Ch 1, turn, sc in each st to end, 2 sc in end st (14 sc). Ch 1, turn, inc. in first sc, sc in next, ps in next, sc in next, holding 2 loops of last sc on hook, drop White on wrong side, draw loop of color through 2 loops on hook, completing sc, work over starting end of color and White, carrying it along, make 1 ps in color (for eye), pick up White, draw through 2 loops of final sc, fasten off color, and complete row of puffs in White. Ch 1, turn, sc in each st to end, 2 sc in end sc (16 sc). Ch 1, turn, inc. in first sc, work in ps to end of row. Ch 1, turn, sc in 17 sts. Ch 1, turn, 7 ps in row. Ch 1, turn, sc in each st across. Fasten off.
Sew head to body as illustrated. Make second side to correspond, BUT BE SURE TO MAKE INCREASES AND DECREASES AT OPPOSITE ENDS OF EACH ROW, so that when wrong sides of work are placed in position to sew together, they will be alike and same size.

FOR HOLDER: Pad each half, then line with muslin. Press each piece on wrong side. Place padded sides together, starting at base of neck and stitch together around nose, head, and across top of body and around to base of tail.

COLLAR: With color, ch 26, 25 sc on ch. Cut thread 6" from work, thread to needle, place around neck and sew ends together. Sew bone ring to collar as illustrated.

SLEEPY-TIME TOY

With a crocheted inset piece to go between the sides and stuffed; Scottie is a soft, cuddly sleeping toy. Unlike so many store toys, it may be washed, blocked and restuffed when soiled. So soft it won't hurt a sleeping child when rolled on in the crib.

After making the two sides as for holder, an inset piece is crocheted to be placed between the sides to give depth and room for stuffing as follows:
Ch 8, 7 sc on chain. Repeat Rows 2 and 3 of feet alternately, until 79 rows of puffs are complete. Do not cut thread. This inset is to be stitched between the two body pieces at edge, on right side of work. Start sewing at back of neck, with end of piece so that rows may be added or taken off if needed. When exact length of inset is determined, break thread and sew ends together. Care must be taken that either body or inset is not drawn, in stitching, or stretched. Be sure when sewing that all corners are exactly opposite. Leave opening at top of body,—stuff, and close. Work collar same as for holder using 40 sts for chain.
A colored puff for nose can be worked on inset and mouth embroidered, if wanted.